AerialGuard® Angle Bracket

APPLICATIONS
Angle brackets are designed to support the covered conductors used in the AerialGuard® spacer cable system when the circuit makes a turn. They are affixed on the utility pole to maintain the spacer cable system configuration when creating line angles from 6 degrees to 90 degrees. The brackets accommodate the full range of AerialGuard® polymer insulators.

CONSTRUCTION
Carbon steel SAE 1010 to 1020 laminated. Hot-dip galvanized (ASTM A-153). The material used follows the SAE (Society of Automotive Engineers) standards, which are widely applied in the automotive, aerospace, and mobility industries.

FEATURES & BENEFITS

Cost-effective alternative to crossarm transitions.
Pre-drilled holes for insulators and standard 8” pre-drilled pole attachment.
Pole mounting is achieved using either 5/8” or ¾” through bolts or double arming bolts (not included).
Accepts Insulator plate when required on larger conductors or 61 to 90degree angles.
Predrilled ground lug mounting hole.
AerialGuard® brackets are interchangeable with other manufacturer's spacer cable systems.

Item Number	Mfg Item Number	System Voltage (kV)	DIMENSIONS		MIN. YIELD LOAD		Weight (lb)
			A (in)	B (in)	V1 (lb)	V2 (lb)
AB-15	409.874	15 kV and below	22.83	17.32	NOMINAL RESISTANCE: 450 NO PERMANENT DEFORMATION: 629 WITH PERMANENT DEFORMATION: 899	NOMINAL RESISTANCE: 225 NO PERMANENT DEFORMATION: 315 WITH PERMANENT DEFORMATION: 450	16.52


AB-35	409.876	35 kV and below	25.20	19.48	NOMINAL RESISTANCE: 450 NO PERMANENT DEFORMATION: 629 WITH PERMANENT DEFORMATION: 899	NOMINAL RESISTANCE: 225 NO PERMANENT DEFORMATION: 315 WITH PERMANENT DEFORMATION: 450	19.80

UPDATED jUNE 6, 2025